Author: admin

Online Businesses for Stay at Home Moms

January 30, 2018


Comments Off on Online Businesses for Stay at Home Moms

Online businesses for stay at home moms are becoming more popular every day. The need to be at home and make money tears the hearts of many women as they try to decide what they should do or not do. If you are a mother, and you are reading this article, you can be hopeful! There are some great options of how you can make money online easily, and with a little

Most Online Businesses are Affordable to Start

One misconception about online businesses for stay at home moms is that they are expensive to market. They really aren’t, especially when you are considering how to get one started, how to run it and maintain it. You should also keep in mind that when you compare the cost of a brick and mortar business to an online business, the level of expense is dramatically lower, hands down.

In fact, let me give you my first example which would be on affiliate marketing. Affiliate marketing has no cost involved to get signed up, which is great. In some cases, depending on the retailer or the product you wish to promote, you may or may not have to pay a fee to buy a special website or banner ad.

Amazon offers many different ways to do this, and is a bit more involved; however, generally speaking most retailers don’t require this. It’s free to sign up, they give you access to HTML code, and you can copy and paste that into your blog without too much trouble.

Businesses on the Internet are Easy to Work Around

You may or may not already realize this, but online businesses for stay at home moms are easy to work around. This is because with online marketing, you can access it or change anything you wish at any time of the day.

Being a stay at home mom is demanding, so you have to keep up with it and your kids. However, it doesn’t have to be all that hard if you can figure out a routine of some sort. During naptimes is a great time to get things done if possible and we all know that you still have to keep the place clean too, which isn’t easy!

So, with an online business, it’s easy for stay at home moms to do what they need to do, and have the ability to earn an income as well.

An Online Business Can be Super Profitable

If you have never heard the story of Michelle Pescosolido, then this will do your heart good. Michelle was a stay at home mom who was working a side business in network marketing and wasn’t making a lot when she first started.

However, once she learned the power of marketing online, Michelle grew her business into a six figure income within 6 months. With an additional 6 months of trial and error, she realized it would stick and brought her husband home from his job in corporate America.

So, no matter what others tell you, you can see the benefit of an online business! If you are a mom who wants to stay at home to have more time with your children, but still need to have an income, then having an online business can make that possible. It provides the potential for making money and having the flexibility that is beneficial to family life.

Tips on Becoming a Mobile Hairdresser

January 30, 2018


Comments Off on Tips on Becoming a Mobile Hairdresser

Fed up of working at a large and busy salon? Feel like being your own boss for a change? Becoming a mobile hairdresser is no easy feet but if you have the confidence and resources to start your own business, do it. It can be very rewarding!

Getting the Word Out

Think about your target audience and the best ways to approach them. People seeking mobile hairdressers could be stay-at-home mums, the elderly, people with disabilities, brides and bridesmaids, and others for whom it is important to find a hairdresser who can come to their home or venue.

Start spreading the word through friends and acquaintances. It could be worth offering special deals to your first ten clients or so. Always make sure to deliver good service as you can’t risk damaging your reputation if your mood is a bit off.

If you’re familiar with various social networks such as Facebook and Twitter, set up accounts for your business and use trending hashtags to tap into local audiences. It’s also worth looking into joining forums and directories. For example, there are many of these for mums and the disabled.

Keeping Yourself Organised

Keeping yourself organised is vital to business success. In order for you to be able to focus on hairdressing, think about employing an accountant or bookkeeper to take care of your finances and tax. It’s worth consulting a professional before launching your business.

Make sure you keep an appointment diary, and always have it on you so you don’t risk double booking clients.

Keep your equipment in check, always making sure you have the necessary items for your next appointment, depending on the service you’ll be delivering: cutting, dyeing, blow drying or the like.

It’s also worth keeping some of your diplomas or certificates on hand, especially if visiting new clients. They may wish to see proof that you’re qualified for the job.

Gaining New Skills

To stay ahead of the competition and show you really care about your job, attend the occasional course to gain some new skills and knowledge. Heard of a new technique for creating highlights? Look out for courses being held in your area.

You could also attend conferences and seminars further afield to gain valuable contacts and experience.

If you are using social media for advertising, be sure to mention these courses. You should also drop them into conversation when chatting to your clients.

Renewing Your Equipment

Don’t let your hair salon equipment get outdated. Old tools won’t leave a good impression on your clients so be sure to regularly inspect all your equipment to spot any signs of ageing.

For example, scissors can go rusty and electricals can simply start looking outdated considering the speed at which the industry releases new products.

8 Tips To Prevent Pipes From Freezing

January 30, 2018

Industrial Mechanical

Comments Off on 8 Tips To Prevent Pipes From Freezing

Do you have any idea as to what the Arctic Vortex is? Actually, this thing is responsible for bringing a lot of cold. In winter, if you have a frozen pipe problem, you may want to follow the tips given below to make sure that your pipes don’t freeze.

Be Prepared

It matters to get ready ahead of time. What you need to do is cut a few blocks of foam to seal the base vents. Also make sure you know the location of the water shutoff. This will help you deal with the situation in case you find a broken pipe. You may also want to have a temporary patch kit in order to seal the burst pipes. You can then wait for the right season to get it repaired. You should do you research to find out the best plumber to fix the pipes that have already been frozen.

Increase the thermostat

If your house is an old one and built over a non-insulated crawl space, you may want to increase the thermostat to raise the air temperature. This will keep all of the pipes from freezing.

Install Fiberglass

You should get some insulation of unfaced fiberglass. Moreover, you should get some disposable coveralls, work gloves, a dust mask and some knife blades. Once you have worn the gloves, you should figure out your insulation needs.

Use Foam Board

Do you want to protect a wide area? If so, you can use a barrier of foam board to retain the heat. You can also do with an unfaced or faced foam board if you want a temporary fix. You can use a sharpie or a pencil to mark the surface.

Install a Heating Cable

You should consider installing a heating cable. Before you do this, make sure you read the instruction manual. Some tapes run along the pipe and some are wrapped around it. At times, the cable needs to be cut so you need to opt for a kit to get it into the desired shape.

Use A Space Heater

You can put an electric heater close to the pipes to keep the cold away. Keep in mind that the purpose is not to keep the space comfortable. Instead, the goal is to keep the water in the pipes from freezing.

Turn The Water off

Another option is to turn the water off by closing the main valve, especially if you are not going to stay in the house. In case the pipes freeze, the spillage will be limited to the amount of water in the pipe.

Open Cabinet Doors

The pipes may be running to your exterior wall or the kitchen sink, and the pipes may be vulnerable since the wall is not usually insulated. To let the heat come in, you may want to open the doors of the cabinet along the wall. For extra protection, you can put the heater near the cabinets.

So, if you have been looking to keep your pipes from freezing in winter, we suggest that you follow the tips given in this guide. Hope this will help.

Packaged Water Bottle Testing – 3 Important Tests for Every Manufacturer

January 30, 2018

Industrial Mechanical

Comments Off on Packaged Water Bottle Testing – 3 Important Tests for Every Manufacturer

With the rising demand for packaged drinking water, the beverage companies are investing a big share in packing and promoting mineral-rich water. But there is a considerable difference in the prices. The reason behind this is quality of packing that is used for packing the water. A good quality bottle has undergone different types of testing and is considered as user-friendly and safe as primary packing.

By not going into the molecular structure or chemical properties, physical properties are really a matter of concern for most of the manufacturers. Deformed bottles, broken bottles, leaked caps, etc. may lead to spoilage of the whole lot and may face straightway rejection from QC in-charge or from the retailer. To cut down the rejection cost and failure cost, it is important to perform the test before starting the mass production of the bottles.

Top Load Testing – During transportation or in warehouses, the bottles are stacked over each other. It is a very common technique of utilising the space efficiently. Due to stacking, bottles are being subjected to a constant compressive load. This may result in buckling of the bottle from different points, like from the neck or from the bottom. To avoid such deformities, manufacturers must perform top-load testing by applying a compressive load on the bottle sample. If manufacturers understand the behaviour of their bottles, they can issue the guidelines to the carrier not to subject the load exceeding the defined limit. In case of failure to follow the guidelines, claims can be slapped on the carrier company.

Torque Testing – Torque is the rotational force applied to the cap to open it. To make bottles user-friendly, it is important to have right torque requirements. The user of a packaged water bottle could be a 10 years old child or a 65 years old lady. So, there is a huge variation in strength that can be applied. Having the appropriate torque not only makes the bottle user-friendly but also assures the leak resistance.

Bottle Drop Testing – It is a very simple test but tells a lot about the crack resistance or dent resistance properties of the bottles. When PET bottle falls from a height accidentally or due to manhandling, how strong it is to bear the impact of free falling? In this test, the bottle is made to drop from a height and visual analysis is done to see any deformity developed. Drop testing instrument is a standardised instrument designed as per the testing standards issued by relative authorities.

For capturing a good market share it is very important to think from customer’s perspective. Failing to adhere quality standards result in short lived success. Thus, delivering a good user experience along with good quality should be the priority of manufacturers.

All About Salt Spray Testing

January 30, 2018

Industrial Mechanical

Comments Off on All About Salt Spray Testing

A salt spray test is also called corrosion testing and is performed on metal products. This test estimates the resistance of surface coating against the corrosion initiating conditions. In a neutral salt spray test, the specimen is exposed to the saline fog for a specific duration and when the test cycle is completed, the specimen is analysed visually. There are standards defined by relative authorities to perform the test step by step. ASTM B117 is followed that has defined all the conditions and precautions to be taken while performing this test.

Test Procedure

· To perform the test, first of all, a standardised salt spray chamber is required.

· To begin the test, place the sample in the chamber by rubbing off all the contaminants like dust or grease from the specimen surface.

· The angle of placement should be 20° and the should be kept away from the chamber walls. Close the canopy of the chamber and set the time period.

· The duration of the test can be in the multiple of 24, like, 24 hours, 48 hours, 72 hours and so on.

· Many machines are equipped with HMI panel or touch screen panel to allow the profile programming.

· Once the test is complete, the specimen is taken out and analysed visually.

· If the specimen does not show any traces of rust it passed the test, else it is failed.

Precautions to be Taken

· The temperature of the chamber should be approx. 37°C.

· The level of fog that is to be maintained is 5ml.

· During the test, the canopy should not be opened. It disturbs the test conditions that are maintained inside the chamber.

· It is very important that the test should run non-stop. Therefore, it is very necessary to have a water reservoir.

· The sample should not be placed very close to the walls, it may result in uneven exposure to fog.

Importance of Corrosion Testing

In metal industries, this test serves different purposes. Some industries try to evaluate the behaviour of their product in real working conditions, while some try to estimate the shelf life of their product. There is one interesting analysis and that is a determination of salt spray life. It can be defined as the number of hours a specimen can withstand without developing the corrosion. In many industries, it is used as the parameter to judge the regression in the production process. Over the time, due to wear and tear of the machine or with the age of the machine the production process starts to develop loopholes which might not get recognised unless tested. The quality of the coating starts to degrade unintentionally. This degradation can be determined by salt spray testing. If a coated product used to have a salt spray life of 96 hours but now it has started to fail at 84 hours, this means the coating process needs reconsideration.

It is an internal way of setting up quality standards. The manufacturer must consistently adhere to these standards to deliver high-quality products. Salty fog testing is considered an important parameter in the metal industry. It not only tests the sustainability of the coated surface but also determines the real-time behaviour of the product.

There is always a misconception among the manufacturers and they try to relate the salt spray life with real life. But this is not the aim of the test. Because in real life conditions, there is a periodic cycle of wet and dry events. However, in simulated tested conditions, there are constant wet conditions. Understanding the right aim of this test is very important so that right testing purpose can be served.

Insulation Covers And Connectors – Important Electrical Accessories

January 30, 2018

Industrial Mechanical

Comments Off on Insulation Covers And Connectors – Important Electrical Accessories

Brief on Insulation Covers
Insulation covers or blankets help maintain process temperature, protect machine components from environmental stress and give highest level of insulation thus ensuring long product life. They not only protect the product but also the personnel working on the machines. Insulation covers reduce undue stress on the machinery and offer increased energy efficiency. These blankets also aid in effective process control by keeping checks on process temperatures, flow of the material, levels of ingredients in the process, etc. Overall they help in making the process cost effective.

An insulation cover is either tight fit or removable. Even the tight fit covers are removable and replaceable. They ensure a complete covering and are highly long lasting. Customized insulation blankets can be designed by studying the facility, evaluating the process parameters and ensuring they increase the efficiency.

Brief on Screened Separable Connectors

Functional Parameters
Connectors are an electro mechanical device for joining and making the electrical terminations touch proof. They consist of a male component viz. Plugs and the female component viz. Jacks. The screened separable connectors are made of silicone EPDM rubber. They connect cables to switch gears, transformers and other equipment. These connectors are protected by touch proof outer screen making them fully insulated, submersible. The fully screened connection makes mating with both A and C type bushings possible. Their design is compact, finish is smooth, current capacity is high to the tune of 250A, 630A to 1250A and performance is effective. Their voltage ratings are 11KV, 15KV, 24KV, etc. Using these connectors both ends of the cable are terminated sometimes using identical connectors or at times terminated differently.

The screened separable connectors are easy, safe and quick to install due to their optimized design and selection of material. They fit into smallest of installation spaces and even when the clearances for operation is insufficient.

Connectors are a physical interface and they should be of a proper size, offer good resistance, give proper insulation, show ruggedness, should be resistant to water, pressure and other factors. Their reliability, durability and ease of installation determine the area of usage.

These connectors find usage in a wide range of industries like electric substation, underground distribution, shipping, mining, oil and gas, railways, etc.

Screened separable connectors make the terminations touch proof and the insulation covers provide utmost electrical safety. The installation, operational and performance qualification of these accessories must be well documented to ensure compliance with regulations. Onsite training and documentation of the same is also a requirement for safety compliance.

Top 7 Considerations to Keep in Mind for Hiring House Builders

January 29, 2018

Construction Industry

Comments Off on Top 7 Considerations to Keep in Mind for Hiring House Builders

If you’re at a stage of your life when you can sponsor your dream home, then this article is for you. Your builder or contractors are the most significant architects of your dream, and you need to ensure that you’re taking sagacious steps towards the selection of the same. Read on for the top 7 tips to select new house builder. Do not forget that at the heart of a thriving residential project are the skills of the builder. So, make sure you’re leaving no stone unturned to find out what the right ways are.

Tips to Get the Best Builder on Board for your Residential Project

What are the factors that you need to keep in view while you are in the process of selecting a building contractor? This primer will help you explore.

Know how to check credentials

In the course of the post, you will eventually come across suggestions of turning to friends and other trusted sources for referrals but do know for a fact that your friend’s recommendation is not the only stamp of credentials. The best bet would be to reach out to the right regulatory agency to find out if the builder has the required license or bonds or not.

Reach out for personal recommendations

Family, friends, neighbours and other trusted sources – you should seek referrals from everyone who you trust and preferably whose home design you like. Instead of just sticking to one name, opt for various recommendations. Before settling for a decision, conduct comparisons based on

  • Cost
  • Gallery of work
  • Reputation (read up online reviews)
  • Experience

Do you depend on the door-to-door contractors?Have you been approached by contractors who – post a disaster – have just chosen to invade your area to cash in on the trail of destruction? Did you end up refusing them at that time? Are you at present – when you are ready to launch your dream project- mulling their services? Let us tell you that the most prudent contractors out there will eventually ask you to refrain from such practices quite merely because the door-to-door contractors solely depend on high-pressure sales tactics to lure clients.

Do not forget the local home builders.

There is a definite advantage of roping in credentialed home builders who operate nearby. You can almost rest assured the fact that they will not be kept from their work by natural disasters.

Securing information about their insurance policies is essential.

You should not collaborate with any contractor until you have checked the personal liability damage, workers’ compensation and property damage insurance.

Check their previous work.

In this regard, it must be mentioned that only looking up their websites for their gallery of work will not do. Make sure you are asking them about details of their previous projects – with the primary aim of estimating their ability to meet client-specific needs.

For instance, if you are looking forward to adding a granny flat you should find out if they have the experience of building granny flats or not.

Don’t be overwhelmed by costs.

The general inclination is to settle for the cheapest services possible after comparing quotes but make sure you are not compromising quality in the process.

Innovations in Temporary Lighting for Construction Sites

In the old days, construction site lighting typically consisted of some bulbs and pigtails haphazardly strung along an electric wire. It was usually hung from nails pounded into sections of the construction site. Needless to say, lighting this way caused many problems. Not only was this temporary lighting difficult and often dangerous to install, it was dangerous itself, with a high risk of shock and even electrocution. This type of lighting is thankfully a thing of the past. New options in temporary construction site lighting have emerged and they have many advantages.

New construction lights are now specifically made for the job site. For example, durability is a big concern. New lights are made of LED technology, which allows for lights that last longer and give brighter light. LED’s are also much smaller and lighter, making installation much easier and safer. Maintenance is also much easier due to the enhanced durability. New lights are also made to withstand the typical knocks and drops that might be experienced on a job site. Most come inside a plastic cage making the actual light bulb harder to damage. Older lights were typically hot to the touch, making them dangerous to make contact with. This risk is almost eliminated with the addition of the plastic cages and guards that today’s lighting employs. The plastic cages are also impact resistant, making damage from drops, impacts, accidents and other natural or unnatural phenomena much less likely to occur.

The cables and cords that hang the lighting have also been updated, with much stronger cords that encase the actual electrical wire, making accidental cuts or frays much less likely, thereby making shocks and electrocution accidents dramatically lessened. Nowadays, temporary lights are also required to be properly grounded, especially any metal parts, and also feature overcurrent protection.

To help with hanging the lights, many temporary lighting systems come with molded cables, eyelets, stress relief ridges and PVC hangers specially made to make hanging and also removing the lights a much easier task.

Weather resistance is also incorporated into temporary jobsite lighting these days. In the past, temporary lighting on a jobsite would require the lights to be exposed to weather such as rain or even snow. This can cause significant danger, so much so that some work might be suspended during inclement weather. Not so nowadays, with the cables and lights well protected with plastic guards, molds and even waterproofing.